EL 65-445

SKU:
PHP22,500.00
PHP22,500.00
Unavailable
per item
SHORT DESCRIPTION
  • 60cm built-in gas cooktop, stainless steel finish
  • 4 Defendi® gas burners
  • Dimensions (WxD): 60 x 51cm
  • Cutout Dimensions (WxD): 56 x 48cm
​
PRODUCT HIGHLIGHTS
  • ​60cm built-in gas cooktop, stainless steel finish
  • 4 Defendi® gas burners
  • 1 triple ring compact burner (3.5kW)
  • Equipped with flame failure safety devices
  • Knob-integrated ignition system
  • Cast-iron pan supports with wok support
  • Stainless steel cooktop
  • Embossed ELBA logo
  • Dimensions (WxD): 60 x 51cm
  • Cutout Dimensions (WxD): 56 x 48cm
Sold out
  • ​Cooking Zone
  • Specifications
  • ​Technical Details
  • Installation Guide
<
>
​​​• Cooking Zone: 
Number of Cooking Zone(s): 4 Defendi gas burners
  1. Auxiliary burner (A),      power: 1.00 kW   
  2. Semi-rapid burner (SR), power: 1.75 kW                              
  3. Triple-ring compact (TRC),  power: 3.80 kW  

• Control Panel
   4. ​Triple-ring compact (TRC) control knob (3)
​   5. Left semi-rapid (R) burner control knob (2)
   6. Right semi-rapid (R) burner control knob (2)
   7. Auxiliary burner (A) control knob (1)
• Controls: Knob controls
• Electronic ignition
• Equipped with safety device on all burners
• Pan Supports: Streamlined design cast-iron (2)
• Wok Support: Cast-iron (1)
​​​Overall dimension (W x D): 600mm x 510mm
Installation cut-out sizes (W x D): 560mm x 480mm
Power Supply: 220V / 60Hz (for ignition purpose only)
INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktop can be built into a working surface 20 to 40 mm thick and 600 mm deep.

2.In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in fig. 1 has to be made, bearing in mind the following:
  • A 40mm ventilation gap must be provided between the bottom of the appliance and any cabinetry, draw unit, thermal protection barrier or appliance.
  •  If the cooktop is installed directly above an oven (which does not have a cooling fan motor) a thermal protection barrier must be installed below the base of the cooktop as indicated in fig. 1.
  • If the base of the cooktop is accessible through a cupboard or drawer space after installation or if the oven installed below the cooktop has a cooling fan motor, the thermal protection barrier is not required.
  •  If the cooktop is installed above an oven, the two appliances shall be connected to the gas and/or electrical supply with independent connections.
  • The cooktop must be kept no less than 200 mm away from any side wall.
  •  The hob must be installed at least 60 mm from the wall (from rear edge of cutout - fig. 1).
  • There must be a distance of at least 650 mm between the hob and any wall
    cupboard or extractor hood positioned immediately above (see fig. 2).
Buy it now
​Buy it now
Download now