E 345-450 GL

SKU:
PHP26,500.00
PHP26,500.00
Unavailable
per item

SHORT DESCRIPTION

• 60 cm built-in Vitroceramic cooktop

• 4 Vitroceramic cooking zones 

• EuroKera® ceramic glass surface

• Knob Controls

Dimensions: 59 x 51 cm  (W x D)

Cutout Dimensions: 56 x 49 cm (W x D)


Made in Italy

Sold out
  • Cooking Zone
  • Specifications
  • Technical Details
  • Installation Guide
<
>
​​​• Cooking Zone: 
Number of Cooking Zones: 4 vitroceramic heating zones​
  1. Hi-Light heater 180mm, power: 1800W  (2)                             
  2. Hi-Light heater 140mm, power: 1200W  (2)                       

• Control Panel
   3. Left front zone (1) control knob
   4. Left rear zone (2) control knob
   5. Right rear zone (3) control knob
   6. Right front zone (4) control knob
   7. Residual heat indicators
   8. Power on indicator light 
• Controls: Knob controls
• Power Levels: 12 (max.)
• Residual heat indicator
Overall dimension (W x D): 590mm x 510mm
​Installation cut-out sizes (W x D): 560mm x 490mm
Maximum Electric Input: 6000W​
Power Supply: 220V / 30A / 60Hz
 INFORMATION FOR THE INSTALLER
This cooktop can be built into a working surface 30 to 40 mm thick and 600 mm deep.


In order to install the ceramic hob into the kitchen fixture, a hole with the dimensions shown in figures 1 has to be made, keeping in consideration the following:
  • NOTE: A partition should be fitted a minimum of 2 cm below the base of the hob (fig. 2).
  • the ceramic hob must be kept no less than 50 mm away from any side wall;
  • the rear wall must be at least 50 mm from the ceramic hob;
  • there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 3);
  •  the coatings of the walls of the unit or appliances near the cooktop must be heat resistant.
  • Do not install the appliance near inflammable materials (eg. curtains).

​​
Buy it now
​Buy it now
Buy it now
Download now