E 235-115 X

SKU:
PHP10,990.00
PHP10,990.00
Unavailable
per item
SHORT DESCRIPTION
  • 30cm built-in gas cooktop, stainless steel finish
  • 1 Sabaf® gas burners
  • Dimensions (WxD): 28.8 x 51cm
  • Cutout Dimensions (WxD): 27 x 49cm

​PRODUCT HIGHLIGHTS
  • 30cm built-in gas cooktop, stainless steel finish
  • 3 Sabaf® gas burners
  • 1 triple ring burner (3.5kW)
  • Equipped with flame failure safety device
  • Knob-integrated ignition system
  • Cast-Iron pan support
  • Stainless steel cooktop
  • Laser Etched ELBA logo
  • Dimensions (WxD): 28.8 x 51cm
  • Cutout Dimensions (WxD): 27 x 49cm
  • Cooking Zone
  • Specifications
  • Technical Details
  • Installation Guide
<
>
​• Cooking Zone: 
Number of Cooking Zone(s): 1 Sabaf gas burner
  1. Triple ring burner (TR),  power: 3.50 kW   

• Control Panel
   2. Triple ring burner control knob
​
• Controls: Knob controls
• Electronic ignition
• Equipped with safety device on all burners
• Pan Support(s): Cast-iron (1)
​Overall dimension (W x D): 288mm x 510mm
Installation cut-out sizes (W x D): 270mm x 490mm
Power Supply: 220V / 60Hz (for ignition purpose only)
INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktop can be built into a working surface 20 to 40 mm thick and 600 mm deep.


2. In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in figs.1 has to be made, keeping in consideration the following:
  • within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or internal shelf there must be a clearance of at least 30 mm;
  • the cooker top must be kept no less than 100 mm away from any side wall;
  • the cooker top must be kept at a distance of no less than 50 mm from the rear wall.
  • there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned
Buy it now
​Buy it now
Download now