E 235-115 XD

SKU:
PHP 12,000.00
PHP 12,000.00
Unavailable
per item
SHORT DESCRIPTION
30cm Gas Cooktop
Stainless Steel Finish
Made in Italy

PRODUCT DETAILS
30cm Gas Cooktop
Stainless Steel Finish
Burner: 1 Defendi® Gas Burner
Burner Type: Triple Ring 3.5kW
Ignition: Electric / Knob-Integrated
Flame Failure Safety Device: Yes
Pan Support: Cast-Iron
Wok Support: None
Controls: Knob Controls
Control Labels: Laser-Etched (non-fade)
Made in Italy

TECHNICAL SPECS
Power: 220-240V, 60Hz
Plug Type: Type B (3 pin with Ground)

Cutout Dimensions (WxDxH): 27 x 49 x 3cm
*Best to have unit on site for actual measurement prior to cutting countertop material

Unit Dimensions (WxDxH): 28.8 x 51 x 3cm
Unit Weight: 5.0Kg

Packaging Dimensions (WxDxH): 36 x 58 x 16cm
Packaging Weight: 5.8Kg Approx

INSTALLATION NOTES

This model needs to be installed with compatible electrical provisions taking into account the following: total electric load, circuit break rating, the thickness of wire used, and the type of outlet and corresponding plug type and rating used (alternative to direct splicing and connection of wires).

This model needs the following accessories (sourced separately) in order to work properly.
LPG Tank with compatible low-pressure LPG Regulator, LPG Hose, and LPG Clamps

Please ensure the compatibility and quality of these accessories, as these directly impact the performance of the unit and YOUR SAFETY. Kindly ensure proper provision for the cutout and provide ample clearance underneath for ventilation and accessibility for troubleshooting and maintenance in the future.

Disclaimer: The following specifications are subject to change without prior notice and serve as a guide only for basic information purposes. Kindly refer to the user manuals for detailed specifications that may / may not have been listed here.
  • Cooking Zone
  • Specifications
  • Technical Details
  • Installation Guide
<
>
​• Cooking Zone: 
Number of Cooking Zone(s): 1 Sabaf gas burner
  1. Triple ring burner (TR),  power: 3.50 kW   

• Control Panel
   2. Triple ring burner control knob
​
• Controls: Knob controls
• Electronic ignition
• Equipped with safety device on all burners
• Pan Support(s): Cast-iron (1)
​Overall dimension (W x D): 288mm x 510mm
Installation cut-out sizes (W x D): 270mm x 490mm
Power Supply: 220V / 60Hz (for ignition purpose only)
INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktop can be built into a working surface 20 to 40 mm thick and 600 mm deep.


2. In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in figs.1 has to be made, keeping in consideration the following:
  • within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or internal shelf there must be a clearance of at least 30 mm;
  • the cooker top must be kept no less than 100 mm away from any side wall;
  • the cooker top must be kept at a distance of no less than 50 mm from the rear wall.
  • there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned
Buy it now
Buy it now
​Buy it now
​Buy it now
Download now