E 395-415 X

SKU:
PHP29,000.00
PHP29,000.00
Unavailable
per item
SHORT DESCRIPTION
• 90 cm built-in gas cooktop with 4 Sabaf® gas burners + 1 electric plate
• Equipped with safety device on all burners
• Cast-iron pan supports with wok support
• Stainless steel design top surface 
Dimensions: 86 x 50 cm (W x D)
  • Cooking Zone
  • Specifications
  • ​Technical Details
  • Installation Guide
<
>
​​​​• Cooking Zone: 
Number of Cooking Zone(s): 4 Sabaf gas burners + 1 electric plate
  1. Auxiliary burner (A),      power: 1.00 kW
  2. Semi-rapid burner (SR), power: 1.75 kW   
  3. Triple ring burner (TR),  power: 3.50 kW
  4. Rapid electric plate 145mm, power: 1500W   ​
​
• Control Panel
   5. Electric plate indicator light
   6. Electric plate control knob (4)
   7. Right semirapid burner control knob (2)
   8. Left semirapid burner control knob (2)
   9. Triple ring burner control knob (3)
   10. Auxiliary burner control knob (1)
• Controls: Knob controls
• Electronic ignition
• Equipped with safety device on all burners
• Pan Supports: Cast-iron (2)
• Wok Support: Cast-iron (1)
​​​​Overall dimension (W x D): 860mm x 500mm
Installation cut-out sizes (W x D): 840mm x 480mm
Maximum Electric Input: 1500W
Power Supply: 220V / 7A / 60Hz
INFORMATION FOR THE INSTALLER
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in fig. 1 has to be made, bearing in mind the following:
  • within the unit, between the bottom of the cooktop and the upper surface of a shelf there must be a clearance of at least 30 mm. It is absolutely essential that you place a separator between the base of the cooktop and the built-in unit or the oven;
  • the cooker top must be kept no less than 200 mm away from any side wall.
  • the hob must be installed at least 60 mm from the wall;
  • there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 2);
  • if the hob is installed over a built-in oven, there must be a distance of at least 30 mm between the two appliances. The two appliances should be connected to the gas supply with independent connections.