E 260-300 X

SKU:
PHP15,300.00
PHP15,300.00
Unavailable
per item
SHORT DESCRIPTION
  • 60cm built-in gas cooktop, stainless steel finish
  • 3 Sabaf® gas burners
  • Dimensions (WxD): 58 x 50cm
  • Cutout Dimensions (WxD): 55 x 47cm
​
PRODUCT HIGHLIGHTS
  • 60cm built-in gas cooktop, stainless steel finish
  • 3 Sabaf® gas burners
  • 1 triple ring burner (3.5kW)
  • Equipped with flame failure safety devices
  • Knob-integrated ignition system
  • Enamelled steel pan supports with wok support
  • Stainless steel cooktop
  • Laser Etched ELBA logo
  • Dimensions (WxD): 58 x 50cm
  • Cutout Dimensions (WxD): 55 x 47cm
  • ​​Cooking Zone
  • Specifications
  • ​Technical Details
  • Installation Guide
<
>
​​​• Cooking Zone: 
Number of Cooking Zone(s): 3 Sabaf gas burner
  1. Triple ring burner (TR),  power: 3.50 kW   
  2. Semi-rapid burner (SR), power: 1.75 kW                              
  3. Rapid burner (R),           power: 3.00 kW

• Control Panel
   4. ​Rapid burner control knob (3)
   5. Left semirapid burner control knob (2)
   6. Triple ring burner control knob (1)
• Controls: Knob controls
• Electronic ignition
• Equipped with safety device on all burners
• Pan Supports: Enameled steel (2)
• Wok Support: Enameled steel (1)
​​Overall dimension (W x D): 580mm x 500mm
Installation cut-out sizes (W x D): 550mm x 470mm
Power Supply: 220V / 60Hz (for ignition purpose only)
INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktop can be built into a working surface 20 to 40 mm thick and 600 mm deep.

2. In order to install the cooktop into the kitchen fixture, a hole with the dimensions shown in fig. 1 has to be made, keeping in consideration the following:
  •  within the fixture, between the bottom side of the cooktop and the upper surface of any internal shelf there must be a clearance of at least 30 mm. It is absolutely essential that you place a separator between the base of the cooktop and the built-in unit;
  •  the cooktop must be kept no less than 100 mm away from any side wall
  •  the cooktop must be installed at least 35 mm from the wall.
  •  there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 2);