E 360-044 X

SKU:
PHP13,300.00
PHP13,300.00
Unavailable
DESCRIPTION
• 60 cm Traditional cooktop with 4 electric hotplates
• Stainless steel 304 top surface
• Stainless steel body
Dimensions: 58 x 50 cm (W x D)
  • Cooking Zone
  • Specifications
  • Technical Details
  • Installation Guide
<
>
• Cooking Zone: 
Number of Cooking Zones: 4 Electric plates
  1. Standard electric plate 145mm, power: 1000W  
  2. Standard electric plate 180mm, power: 1500W​

• Control Panel
   3. Electrical plate indicator light
   4. Rear right electrical plate control knob 2
   5. Rear left electrical plate control knob 1
   6. Front left electrical plate control knob 2
   7. Front right electrical plate control knob 1
• Controls: Knob controls
• Power Levels: 6 (max.)
• Residual heat indicator
​Overall dimension (W x D): 580mm x 500mm
Installation cut-out sizes (W x D): 560mm x 480mm
Maximum electric Input: 5000W
Power supply: 220V / 20A / 60Hz
INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktops are designed to be embedded into kitchen fixtures measuring 600 mm in depth and from 20 to 40 mm thick.

2. In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in fig. 1 has to be made, bearing in mind the following:
  • within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or internal shelf there must be a clearance of at least 30 mm. It is absolutely essential that you place a separator between the base of the cooktop and the built-unit or the oven.
  • the cooker top must be kept no less than 100 mm away from any side wall (fig. 1).
  • the hob must be installed at least 60 mm from the wall.
  • there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above.
  • if the hob is installed over a built-in oven, there must be a distance of at least 30 mm between the two appliances.