ELBA Built-In Gas Cooktop EL 95-545

EL 95-545

SKU:

PHP 40,000.00

Unavailable

per item

SHORT DESCRIPTION

90cm Gas Cooktop

Stainless Steel Finish

Made in Italy

PRODUCT DETAILS

90cm Gas Cooktop

Stainless Steel Finish

Burner: 5 Defendi® Gas Burner

Burner Types:

Triple ring 3.80kW
Rapid 3.00kW
Semi-rapid 1.75kW (2)
Auxiliary 1.00kW

Ignition: Electric / Knob-Integrated

Flame Failure Safety Device: Yes

Pan Support: Cast-Iron

Wok support: Yes

Controls: Knob Controls

Control Labels: Laser-Etched (non-fade) with embossed logo

Made in Italy

TECHNICAL SPECS

Power: 220-240V, 60Hz

Plug Type: Type B (3 pin with Ground)

Cutout Dimensions (WxDxH) 84 x 48 x 4.9cm

*Best to have unit on site for actual measurement prior to cutting countertop material

Unit Dimensions (WxD) 90 x 51 x 4.9cm

Unit Weight: 15.80Kg

Packaging Dimensions (WxDxH) 60 x 99 x 15cm

Packaging Weight: 17.60Kg Approx

INSTALLATION NOTES

This model needs to be installed with compatible electrical provisions taking into account the following: total electric load, circuit break rating, the thickness of wire used, and the type of outlet and corresponding plug type and rating used (alternative to direct splicing and connection of wires).

This model needs the following accessories (sourced separately) in order to work properly.

LPG Tank with compatible low-pressure LPG Regulator, LPG Hose, and LPG Clamps

Please ensure the compatibility and quality of these accessories, as these directly impact the performance of the unit and YOUR SAFETY. Kindly ensure proper provision for the cutout and provide ample clearance underneath for ventilation and accessibility for troubleshooting and maintenance in the future.

Disclaimer: The following specifications are subject to change without prior notice and serve as a guide only for basic information purposes. Kindly refer to the user manuals for detailed specifications that may / may not have been listed here.

Quantity

Add to Cart

Cooking Zone
Specifications
Technical Details
Installation Guide

• Cooking Zone:
Number of Cooking Zone(s): 5 Defendi gas burners

Auxiliary burner (A), power: 1.00 kW
Semi-rapid burner (SR), power: 1.75 kW
Rapid burner (R), power: 3.00 kW
Triple-ring burner (TR), power: 3.50 kW

• Control Panel
5. Left semi-rapid (SR) burner control knob (2)
6. Left rapid burner (R) control knob (3)
7. Center triple-ring (TR) control knob (4)
8. Right auxiliary burner (A) control knob (1)
9. Right semi-rapid (SR) burner control knob (2)

• Controls: Knob controls
• Electronic ignition
• Equipped with safety device on all burners
• Pan Supports: Streamlined design cast-iron (3)
• Wok Support: Cast-iron (1)

Overall dimension (W x D): 900mm x 510mm
Installation cut-out sizes (W x D): 860mm x 480mm
Power Supply: 220V / 60Hz (for ignition purpose only)

INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktop can be built into a working surface 20 to 40 mm thick and 600 mm deep.

2.In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in fig. 1 has to be made, bearing in mind the following:

A 40mm ventilation gap must be provided between the bottom of the appliance and any cabinetry, draw unit, thermal protection barrier.
If the base of the cooktop is accessible through a cupboard or drawer space after installation, a thermal protection barrier must be installed below the base of the cooktop as indicated in fig. 1.
The cooktop must be kept no less than 200 mm away from any side wall.
The hob must be installed at least 60 mm from the wall (from rear edge of cutout - fig. 1).
There must be a distance of at least 650 mm between the hob and any wall
cupboard or extractor hood positioned immediately above (see fig. 2).

Buy it now

Download now