E 230-020 X

COOKTOPS
>
Electric Hot Plates
>
E 230-020 X

E 230-020 X

SKU:

₱9,000.00

Unavailable

per item

SHORT DESCRIPTION

30cm built-in Electric cooktop

Stainless steel finish

PRODUCT DETAILS

30cm built-in Electric cooktop

Stainless steel finish

2 Electric plates

Power Levels: 6 (max.)

Knob controls

Hot zone indicator

Equipped with safety thermostat (Rapid plate only)

Control Labels: Laser-Etched (non-fade)

ELECTRIC HEATING ZONES: 4 electric plates

Rapid electric plate 180mm, power: 2000W

Standard electric plate 145mm, power: 1000W

TECHNICAL SPECS

Power Requirement: 3000W Max

Power: 220-240V / 60Hz / 14A

Cutout Dimensions (WxDxH): 27 x 49 x 4.5cm

*Best to have unit on site for actual measurement prior to cutting countertop material

Unit Dimensions (WxDxH): 28.8 x 51 x 3cm

Unit Weight: 5.50Kg

Packaging Dimensions (WxDxH): 36 x 58 x 16cm

Packaging Weight: 6.20Kg

INSTALLATION NOTES

This model needs to be installed with compatible electrical provisions taking into account the following: total electric load, circuit break rating, the thickness of wire used, and the type of outlet and corresponding plug type and rating used (alternative to direct splicing and connection of wires).

Please ensure the compatibility and quality of these accessories, as these directly impact the performance of the unit and YOUR SAFETY. Kindly ensure proper provision for the cutout and provide ample clearance underneath for ventilation and accessibility for troubleshooting and maintenance in the future.

Disclaimer: The following specifications are subject to change without prior notice and serve as a guide only for basic information purposes. Kindly refer to the user manuals for detailed specifications that may / may not have been listed here.

Quantity

Add to Cart

Cooking Zone
Specifications
Technical Details
Installation Guide

• Cooking Zone:
Number of Cooking Zones: 2 Electric plates

Rapid electric plate 180mm, power: 2000W
Standard electric plate 145mm, power: 1000W

• Control Panel
3. Electrical plate control knob (1)
4. Electrical plate control knob (2)
5. Power indicator light

• Controls: Knob controls
• Equipped with safety thermostat (Rapid plate only)
• Power Levels: 6 (max.)
• Residual heat indicator

Overall dimension (W x D): 288mm x 510mm
Installation cut-out sizes (W x D): 270mm x 490mm
Maximum electric Input: 3000W
Power supply: 220V / 15A / 60Hz

INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktops are designed to be embedded into kitchen fixtures measuring 600 mm in depth and from 20 to 40 mm thick, for 2 electrical plates cooktop.

2. In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in figs. 1 has to be made, keeping in consideration the following:

within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or internal shelf there must be a clearance of at least 30 mm;
the cooker top must be kept no less than 50 mm away from any side wall;
the cooker top must be kept at a distance of no less than 50 mm from the rear wall.
there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 2).

Buy it now

Download now