E 230-700 X (Available store displays)

SKU:

PHP 18,700.00

PHP 18,700.00

Unavailable

per item

SHORT DESCRIPTION
30cm built-in Electric Barbecue
Stainless steel finish

PRODUCT DETAILS
30cm built-in Electric Barbecue
Stainless steel finish
Tiltable electrical heating element - 2400W
Tray with pumice stone
Power Levels: 12 (max.)
Knob controls
Heating element indicator light
Control Labels: Laser-Etched (non-fade)

TECHNICAL SPECS
Power Requirement: 2400W Max
Power: 220V / 60Hz / 11A

Cutout Dimensions (WxDxH): 27 x 49 x 4.5cm
*Best to have unit on site for actual measurement prior to cutting countertop material

Unit Dimensions (WxDxH): 28.8 x 51 x 7cm
Unit Weight: 7.40Kg

Packaging Dimensions (WxDxH): 36 x 58 x 16cm
Packaging Weight: 8.00Kg

INSTALLATION NOTES

This model needs to be installed with compatible electrical provisions taking into account the following: total electric load, circuit break rating, the thickness of wire used, and the type of outlet and corresponding plug type and rating used (alternative to direct splicing and connection of wires).

Please ensure the compatibility and quality of these accessories, as these directly impact the performance of the unit and YOUR SAFETY. Kindly ensure proper provision for the cutout and provide ample clearance underneath for ventilation and accessibility for troubleshooting and maintenance in the future.

Disclaimer: The following specifications are subject to change without prior notice and serve as a guide only for basic information purposes. Kindly refer to the user manuals for detailed specifications that may / may not have been listed here.

Quantity

Sold out

Add to Cart

• Cooking Zone
• ​Specifications
• Technical Details
• Installation Guide

<

>

• Cooking Zone: 
​​1. Grill
2. Tiltable electric heating element - 2400W
3. Tray with pumice stone

• Control Panel
4. Heating element adjuster knob
5. Heating element ON indicator light

​• Electric barbecue
• Grill
• Tiltable electrical heating element 
• Tray with pumice stone
• Power Levels: 12 (max.)
• Controls: Knob controls
• Heating element indicator light

Overall dimension (W x D): 288mm x 510mm
Installation cut-out sizes (W x D): 270mm x 490mm
Maximum electric Input: 2400W
Power supply: 220V / 10A / 60Hz

INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktop can be built into a working surface 30 to 40 mm thick and 600 mm deep.





2. Mount an extractor hood above these appliances to remove fumes and smells produced during operation. To fit the cooktop into the unit make an opening of the dimensions given in the figures above, remembering that:

• inside the unit there must be a space of at least 30 mm between the bottom of the cooktop and the top of an appliance or bracket.
•  any wall to the side and above the cooktop must be at least 300 mm away.
• the wall behind the cooktop must be at least 50 mm away.
• the rear wall must be at least 50 mm from the ceramic griddle and must with stand a temperature of 150°C.
• when there is a wall unit or hood above the cooktop there must be at least 650 mm between the cooktop and the unit or hood.
•  the coatings of the walls of the unit or appliances near the cooktop must be heat resistant:

Buy it now